The leveling of the canopies must be carried out using a spirit level, optionally with a slight incline towards the condensation drain openings, if feasible.
Rotating nuts M10 are positioned at the corners, 80 x 80 mm from the edges of the canopy. Different placement can be arranged upon request.
The simplest method is suspension on rods firmly anchored to the ceiling, with an M10 thread at the end.
Since the rear suspension points of canopies placed near the wall may be difficult to access, a version can be ordered where their rotating nuts are screwed in through the opening for the grease trap.
1. Suspension on rods: Front suspension
2. Rear suspension
3. Suspension on a frame or brackets
Number of suspensions:
- OZV 9, 11 up to 3500 mm length – 4 suspensions (in corners)
- OZV 13, 15, 17, 20, 22, 24 – up to 2900 mm length – 4 suspensions (in corners)
- OZV 9, 11 lengths 3600 – 6500 mm – 6 suspensions (4 in corners, 2 in the middle of the length)
- OZV 13, 15, 17, 20, 22, 24 lengths 3000 – 5000 mm – 6 suspensions (4 in corners, 2 in the middle of the length)
By agreement, suspensions can be positioned anywhere along the perimeter of the hood but always 80mm from the edge of the hood.
Detailed guide in .PDF: INSTALLATION: HOODS - SUSPENSIONS
